Torpedoes
Torpedoes of the PigBoat era
The mobile torpedo was actually an Austrian invention. The first torpedo was powered by a spring-driven clockwork device and steered by attached cables. In 1864 Robert Whitehead, an English industrialist and engineer employed by the Austrian government took the original design and greatly improved on it. His new weapon was powered by a two-cylinder reciprocating compressed-air engine, with the air compressed in an internal flask to 350 psi. Testing was quite successful and the Imperial Austro-Hungarian Navy was the first to put the Whitehead weapons into service. He was permitted to sell the designs to other governments and quite quickly many navies had adopted the torpedo.
The U.S. Navy's Bureau of Ordnance (BuOrd) was quick to recognize the potential of the new weapon and by 1869 had established the Naval Torpedo Station on Goat Island in Narragansett Bay off Newport, Rhode Island. The technicians and engineers there immediately set about developing a "fish" torpedo, similar in many respects to the Whitehead model. It was not overly successful in testing despite having operational characteristics similar to the Whitehead device. During this time the USN experimented with torpedo designs from several U.S. inventors, but none of them were successful enough to put into service.
The USN's first operational torpedo was the Howell Torpedo, put into service in 1889. It was driven by a 132 lb flywheel, spun up to 10,000 rpm prior to launching. It had two variable pitch propellers with a range of 200 yards at 24 knots. It had a warhead consisting of 100 lbs of wet-guncotton, a very stable but relatively low powered explosive. It was used on torpedo boats and battleships until about 1898.
The U.S. finally obtained manufacturing rights to the Whitehead designs in 1892 and the E.W. Bliss Company of Brooklyn, NY began turning out examples. The Whitehead weapons were much more capable than the Howell torpedo and they quickly supplanted them in the fleet. Research at NTS Newport and by engineers at Bliss quickly improved on the designs, and several versions joined the fleet. When John Holland's submarine the Holland VI was being tested in 1898 and 1899 it carried two Whitehead Mk 2 torpedoes. Whitehead variations equipped submarines in the A through D-class, but rapid improvements in by the Navy and by Bliss quickly eclipsed those original designs.
In 1904 Frank M. Leavitt, one of Bliss's leading engineers and a brilliant technician, developed a whole new design. Rather than simple compressed air, Leavitt heated the air in an alcohol flame and used that to turn a high speed turbine. This greatly improved performance an operational effectiveness. Successive development lead to the Mk 4 version, the first to be specifically designed to be fired from a submarine. Bliss and Leavitt continued to innovate, and developed the wet-heater steam turbine for the Mk 7 torpedo in 1910. This shot a stream of water into the heated air, with the resulting steam being much more powerful than just the heated air. Bliss continued to be a leading force in torpedo manufacturing in the United States, until the post-war draw down of the Navy Department caused no further contracts to be awarded to Bliss after 1920. All torpedo research, development, and manufacturing would be centered at NTS Newport. This was a decision that the Navy would later come to bitterly regret during WWII.
The table below outlines all of the torpedoes used by USN submarines during the Pigboat era. The Navy put into service many more types than listed here, but they were designed for surface ship or aircraft launching and we will not cover them. The column on the far right contains a link to individual pages for each weapon that will have photos and additional information. The data presented here and on the linked pages come from several sources, the three most prominent being in the links below:
• Navweaps.com Torpedoes of the United States
• A Brief History of U.S. Navy Torpedo Development Part 1
• A Brief History of U.S. Navy Torpedo Development Part 2
Type | Length (Ft-In) | Diameter (In) | Weight (lbs.) | Propulsion/Fuel | Warhead | Exploder | Speed (Kts) | Range (yards) | Subs used on/Dates of service | Link to photos |
---|---|---|---|---|---|---|---|---|---|---|
Whitehead Mk 3 | 11-8 | 17.7 | 845 | 3 cyl. radial/compressed air | 118 lbs wet gun-cotton | War Nose Mk 1 contact | 26.5 | 800 | Holland, A, B, C, D-class 1898-1922 | Whitehead Mk 3 |
Bliss-Leavitt Mk 4 Mod 1 | 16-5 | 17.7 | 1500 | Vertical turbine/ alcohol | 199 lbs wet gun-cotton | War Nose Mk 1 contact | 29 | 3000 | C & D-class 1908-1922 | BL Mk 4 |
Bliss-Leavitt Mk 6 | 17-0 | 17.7 | 1800 | Horizontal turbine/ alcohol | 200 lbs wet gun-cotton | War Nose Mk 5 contact | 35 | 2000 | E, F, G, H-class 1911-1922 | BL Mk 6 |
Bliss-Leavitt Mk 7 | 17-0 | 17.7 | 1588 | Wet-heater steam turbine/ alcohol | 205 lbs TNT | Mk 3 Mod 1 contact | 32 | 4000 | K & O-class 1912-1945 | BL Mk 7 |
Bliss-Leavitt Mk 9 Mod 1B | 16-4 | 21 | 2377 | Wet-heater steam turbine/ alcohol | 395 lbs TNT or Torpex | MK 3 Mod 2 contact | 34.5 | 5500 | R & S-class 1915-1945 | BL Mk 9 |
Bliss-Leavitt/BuOrd Mk 10 Mod 3 | 16-4 | 21 | 2215 | Wet-heater steam turbine/ alcohol | 497 lbs TNT or 485 lbs Torpex | Mk 3 contact | 36 | 3500 | R & S-classes, some fleet boats 1915-1945 | Mk 10 |
BuOrd Mk 14 | 20-6 | 21 | 3000 | Wet-heater steam turbine/ alcohol | 507 lbs TNT or 668 lbs Torpex | Mk 6 influence/contact | 46 or 31 | 4500 or 9000 | Fleet boats 1931-1978 | Mk 14 |
Westinghouse Mk 18 Mod 1 | 20-6 | 21 | 3061 | Electric | 595 lbs Torpex or HBX | Mk 8 contact | 29 | 4000 | Fleet boats 1943-1950 | Mk 18 |
BuOrd Mk 23 | 20-6 | 21 | 3000 | Wet-heater steam turbine/ alcohol | 507 lbs TNT or 668 lbs Torpex | Mk 6 influence/contact | 46 | 4500 | Fleet boats 1943-1946 | Mk 23 |
Page created by:
Ric Hedman & David Johnston
1999 - 2023 - PigBoats.COM©
Mountlake Terrace, WA, Norfolk, VA
webmaster@pigboats.com